ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a 19 mm deep socket wrench, install the engine coolant temperature sensor.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

   3. Connect the connector to the engine coolant temperature sensor.

2. ADD ENGINE COOLANT

   Click here

3. INSPECT FOR COOLANT LEAK

   Click here

4. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

6. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

7. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here