ACTIVE CONTROL ENGINE MOUNT INSPECTION

PROCEDURE


  1. INSPECT FRONT ENGINE MOUNTING INSULATOR


    1. A01WRDM

      Visually check the front engine mounting insulator for leaks.

      If the fluid leaks, replace the front engine mounting insulator.

  2. INSPECT FRONT ENGINE MOUNTING INSULATOR


    1. A01WWDIE01
      Text in Illustration
      *a Vacuum

      Connect a vacuum pump to the front engine mounting insulator.

    2. Using the vacuum pump, apply a vacuum of 80 kPa (600 mmHg. 25 in.Hg) and wait for 1 minute.

    3. Check that there is no change in the needle movement of the vacuum pump gauge.

      If the result is not as specified, replace the front engine mounting insulator.