ACTIVE CONTROL ENGINE MOUNT REMOVAL

CAUTION / NOTICE / HINT

Note


  • When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.

  • w/ DPF

    When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines.

PROCEDURE


  1. REMOVE ENGINE ASSEMBLY

    Click here

  2. REMOVE FRONT ENGINE MOUNTING INSULATOR LH


    1. A01WR78

      Remove the nut and front engine mounting insulator LH from the front engine mounting bracket.

  3. REMOVE FRONT ENGINE MOUNTING INSULATOR RH


    1. Disconnect the vacuum hose.

    2. A01WSYH

      Remove the nut and front engine mounting insulator RH from the front engine mounting bracket.