CAMSHAFT POSITION SENSOR INSPECTION

PROCEDURE

1. INSPECT CAMSHAFT POSITION SENSOR

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 Hot 835 to 1400 Ω Cold 1060 to 1645 Ω

      Note

      In the table above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the camshaft position sensor.