CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT POSITION SENSOR


    1. A01WRZZ

      Apply a light coat of engine oil to the O-ring.

      Note

      When reusing the camshaft position sensor, inspect the O-ring.

      If the O-ring has scratches or cuts, replace the camshaft position sensor.

    2. Install the camshaft position sensor with the bolt.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    3. Connect the connector to the camshaft position sensor.

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here