ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. B00191E

      Disconnect the connector from the engine coolant temperature sensor.

    2. Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor and gasket.