ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE ROOF HEADLINING ASSEMBLY (w/ Roof Carrier)

    Click here

  2. REMOVE ROOF CARRIER SUB-ASSEMBLY LH (w/ Roof Carrier)

    Click here

  3. REMOVE ROOF DRIP SIDE FINISH MOULDING LH

    Tech Tips

    w/o Roof Carrier:

    Use the same procedure for both roof drip side finish mouldings LH.


    1. A01WVJIE02
      Text in Illustration
      *a Protective Tape

      Put protective tape around the roof drip side finish moulding LH.

    2. Using a moulding remover, remove the roof drip side finish moulding LH.

  4. REMOVE REAR ROOF DRIP SIDE FINISH MOULDING LH


    1. A01WRK4E02
      Text in Illustration
      *a Protective Tape

      Put protective tape around the roof drip side finish moulding LH.

    2. A01WTK6

      Using a moulding remover, detach the clip and remove the rear roof drip side finish moulding LH.

      Note


      • When removing the rear roof side finish moulding LH, be careful not to damage the clips.

      • If a clip is damaged or becomes detached from the vehicle, replace it with a new one.

  5. REMOVE ROOF DRIP SIDE FINISH MOULDING JOINT COVER LH (w/o Roof Carrier)

    Tech Tips

    Use the same procedure for all roof drip side finish moulding joint covers LH.


    1. A01WTQIE05
      Text in Illustration
      *a Protective Tape

      Put protective tape around the roof drip side finish moulding joint cover LH.

    2. Using a moulding remover, detach the claw and clip and remove the roof drip side finish moulding joint cover LH.

  6. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH (w/o Roof Carrier)

    Tech Tips

    Use the same procedure for both center roof drip side finish mouldings LH.


    1. A01WWN7E05
      Text in Illustration
      *a Protective Tape

      Put protective tape around the center roof drip side finish moulding LH.

    2. Using a moulding remover, remove the center roof drip side finish moulding LH.

  7. REMOVE ROOF RACK BRACKET (w/o Roof Carrier)

    Tech Tips

    Use the same procedure for all roof rack brackets.


    1. A01WUM9

      Remove the 2 bolts and roof rack bracket.