REAR DOOR WINDOW FRAME MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

  • When installing the rear door front window frame moulding LH, heat the vehicle body and rear door front window frame moulding LH using a heat light.

Standard
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Door Front Window Frame Moulding LH 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body and rear door front window frame moulding LH excessively.

PROCEDURE


  1. INSTALL REAR DOOR FRONT WINDOW FRAME MOULDING LH


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new rear door front window frame moulding LH.


      1. Using a heat light, heat a new rear door front window frame moulding LH and the vehicle body surface.

      2. Remove the peeling paper from the face of the rear door front window frame moulding LH.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. B00198OE10
        Text in Illustration
        *a Double-sided Tape

        Attach the clip and double-sided tape to install the rear door front window frame moulding LH.

        Tech Tips

        Press the rear door front window frame moulding LH firmly to install it.

  2. INSTALL REAR DOOR BELT MOULDING ASSEMBLY LH

    Click here

  3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH

    Click here

  4. INSTALL REAR DOOR QUARTER WINDOW GLASS LH

    Click here

  5. INSTALL REAR DOOR REAR LOWER WINDOW FRAME SUB-ASSEMBLY LH

    Click here

  6. INSTALL REAR DOOR GLASS RUN LH

    Click here

  7. INSTALL REAR DOOR SERVICE HOLE COVER LH

    Click here

  8. INSTALL REAR SPEAKER SET

    Click here

  9. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH

    Click here

  10. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  11. INSTALL DOOR ASSIST GRIP COVER LH

    Click here

  12. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  13. INSTALL REAR DOOR TRIM COVER

    Click here

  14. INSTALL REAR DOOR UPPER ARMREST BASE PANEL LH

    Click here

  15. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  17. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here