ROOF CARRIER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL ROOF CARRIER SUB-ASSEMBLY LH


    1. Attach the claw to install the roof carrier subassembly LH.

    2. Install the 6 nuts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

  2. REMOVE ROOF HEADLINING ASSEMBLY

    Click here