REAR BUMPER(w/ Towing Hitch) REASSEMBLY

PROCEDURE


  1. INSTALL REAR BUMPER STEP CUSHION

    Tech Tips

    When installing the rear bumper step cushion, heat the rear bumper cover using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01WQ1V

      Install a new rear bumper step cushion.

      Tech Tips

      Use the same procedure for all rear bumper step cushions.


      1. Remove the peeling paper from the face of a new rear bumper step cushion.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Install the rear bumper step cushion as shown in the illustration.

        Tech Tips

        Press the rear bumper step cushion firmly to install it.

  2. INSTALL REAR BUMPER PAD LH

    Tech Tips

    When installing the rear bumper pad LH, heat the rear bumper cover using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01WQQ0E03
      Text in Illustration
      *a Mark-off Line

      Install a new rear bumper pad LH.


      1. Remove the peeling paper from the face of a new rear bumper pad LH.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Align the rear bumper pad LH with the mark-off line of the rear bumper cover and install it as shown in the illustration.

        Tech Tips

        Press the rear bumper pad LH firmly to install it.

  3. INSTALL REAR BUMPER PAD RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL REAR BUMPER LOWER COVER


    1. Attach the 6 claws and 2 guides to install the install the rear bumper lower cover.

    2. Install the 2 clips.

  5. INSTALL REAR BUMPER UPPER COVER LH


    1. Attach the 2 claws to install the rear bumper upper cover LH.

    2. Install the 4 clips.

  6. INSTALL REAR BUMPER UPPER COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

    Click here

  8. INSTALL REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)


    1. Install the reflex reflector assembly LH with the 3 screws.

  10. INSTALL REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL REAR BUMPER ENERGY ABSORBER


    1. Attach the 8 claws to install the rear bumper energy absorber.

  12. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER

    Click here

  13. INSTALL NO. 2 ULTRASONIC SENSOR

    Click here

  14. INSTALL NO. 2 FRAME WIRE


    1. w/ Rear Fog Light:


      1. Attach the 12 clamps to install the No. 2 frame wire.

      2. Connect the 6 connectors.

    2. w/o Rear Fog Light:


      1. Attach the 8 clamps to install the No. 2 frame wire.

      2. Connect the 4 connectors.