REAR BUMPER(for Standard) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR BUMPER ARM BRACKET LH


    1. Install the rear bumper arm bracket LH with the 2 bolts.

    2. Attach the clamp.

    3. Connect the connector.

  2. INSTALL REAR BUMPER ARM BRACKET


    1. Install the rear bumper arm bracket with the bolt.

      Tech Tips

      Use the same procedure for both rear bumper arm brackets.

  3. INSTALL REAR BUMPER NO. 2 REINFORCEMENT


    1. Install the rear bumper No. 2 reinforcement with the 2 bolts.

  4. INSTALL REAR BUMPER SIDE SUPPORT LH


    1. Attach the 3 claws to install the rear bumper side support LH

    2. Install the 3 screws.

  5. INSTALL REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR


    1. Install the No. 2 luggage compartment side cover protector with 2 new grommets.

    2. Install the 2 screws.

  7. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

    Tech Tips

    Use the same procedure described for the No. 2 luggage compartment side cover protector.

  8. INSTALL REAR BUMPER COVER


    1. Connect the No. 2 frame wire connector.

    2. Attach the 2 guides and 18 claws to install the rear bumper cover.

    3. Install the 7 bolts, 6 screws and 2 clips.

    4. Open the tail gate and install the 6 clips.

    5. Close the tail gate.

  9. INSTALL REAR BUMPER NO. 1 PLATE (for Step)


    1. Attach the 20 claws to install the rear bumper No. 1 plate.

  10. INSTALL REAR QUARTER PANEL MUDGUARD LH

    Click here

  11. INSTALL REAR QUARTER PANEL MUDGUARD RH

    Click here