FRONT BUMPER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment Click here.

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. B0019HJ

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. B0018UGE01
      Text in Illustration
      *A for Gasoline
      *B for Diesel

      Remove the 11 clips and upper radiator support seal.

  4. REMOVE FRONT BUMPER COVER


    1. B0019HS

      Using a T30 "TORX" socket, remove the 3 screws.

      Tech Tips

      Use the same procedure for the other side.

    2. B00197TE02
      Text in Illustration
      *a Screws
      *b Bolt

      Remove the 4 screws and 4 bolts.

    3. B0018F4

      Remove the 3 screws.

    4. w/ Dynamic Radar Cruise Control System:

      Disconnect the connector

    5. Disconnect the front television camera assembly connector.

    6. Disconnect the No. 4 engine room wire connector.

    7. B0018WQE02
      Text in Illustration
      *a Protective Tape

      Put protective tape around the front bumper cover.

      Tech Tips

      Use the same procedure for the other side.

    8. B0018H0

      Detach the 5 claws.

      Tech Tips

      Use the same procedure for the other side.

    9. B00185K

      Detach the 4 claws and remove the front bumper cover.

    10. w/ Headlight Cleaner System:

      Disconnect the headlight cleaner hose.

  5. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. B0018O0

      Remove the front bumper energy absorber.

  6. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. B00189A

      Remove the 6 nuts and front bumper reinforcement sub-assembly.

  7. REMOVE FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY LH


    1. B0018SA

      Remove the 4 nuts and front No. 2 bumper extension sub-assembly LH.

  8. REMOVE FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. B001ADO

      Remove the bolt.

    2. Remove the screw.

    3. Detach the claw and remove the front bumper side support LH.

  10. REMOVE FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE FRONT FENDER MAIN SEAL LH

    Click here

  12. REMOVE FRONT FENDER MAIN SEAL RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  14. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE FRONT BUMPER UPPER CENTER RETAINER


    1. B00197E

      Remove the 4 bolts.

    2. Detach the guide and remove the front bumper upper center retainer.

  16. REMOVE FRONT BUMPER LOWER NO. 2 RETAINER


    1. B0019WC

      Detach the 2 claws and remove the front bumper lower No. 2 retainer.

      Tech Tips

      Use the same procedure for all front bumper lower No. 2 retainers.