RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HORN RELAY ASSEMBLY


    1. A01WSAYE04

      Remove the horn relay assembly.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not to applied between 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage applied to between 1 and 2 Below 1 Ω

      If the result is not as specified, replace the horn relay assembly.