REAR SPOILER INSTALLATION

PROCEDURE

1. INSTALL REAR SPOILER SUB-ASSEMBLY

   Tech Tips

   When installing the rear spoiler sub-assembly, heat the vehicle body and rear spoiler sub-assembly using a heat light.

   Standard
   Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Rear Spoiler Sub-assembly 20 to 30°C (68 to 86°F)

   Note

   Do not heat the vehicle body and rear spoiler sub-assembly excessively.

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new rear spoiler sub-assembly.

      
      

      1. Using a heat light, heat the vehicle body and a new rear spoiler sub-assembly.

      2. Remove the peeling paper from the face of the rear spoiler sub-assembly.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Attach the 3 clips to install the rear spoiler sub-assembly.

         Tech Tips

         Press the rear spoiler sub-assembly firmly to install it.

   3. w/ Power Back Door:

      Install the 4 bolts and 2 hole plugs.

      Torque:

      7.9 N*m  { 81 kgf*cm, 70 in.*lbf }

   4. w/o Power Back Door:

      Install the 4 bolts.

      Torque:

      7.9 N*m  { 81 kgf*cm, 70 in.*lbf }

2. INSTALL BACK DOOR GLASS CHANNEL LH (w/o Power Back Door)

   
   

   1. Attach the clip and install the back door glass channel LH.

3. INSTALL BACK DOOR GLASS CHANNEL RH (w/o Power Back Door)

   Tech Tips

   Use the same procedure described for the LH side.

4. INSTALL CENTER BACK DOOR GARNISH

   Click here