HAZARD WARNING SWITCH INSPECTION

PROCEDURE


  1. INSPECT MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. Inspect the multi-display assembly (hazard warning switch).


      1. A01WW8QE02
        Text in Illustration
        *a

        Component without harness connected

        (Multi-display Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        F77-9 (HAZ) - F77-10 (LJB) Hazard warning switch off 10 kΩ or higher
        Hazard warning switch on Below 1 Ω

        If the result is not as specified, replace the multi-display assembly.