STEP LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT STEP LIGHT ASSEMBLY (for LH Side)


    1. A01WV1OE02

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → g5-2

      Battery negative (-) → g5-1

      		 Illuminates

      If the result is not as specified, replace the step light assembly.

  2. INSPECT STEP LIGHT ASSEMBLY (for RH Side)


    1. A01WVQ2E02

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → g6-2

      Battery negative (-) → g6-1

      		 Illuminates

      If the result is not as specified, replace the step light assembly.