LICENSE PLATE LIGHT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY


    1. A01WRS5

      Connect the grommet.

    2. Attach the claw to connect the connector.

    3. Attach the 3 wire harness clamp.

    4. Connect the license plate light:

      Tech Tips

      Use the same procedure to connect the license plate light on the other side.


      1. A01WWQD

        Set the license plate light in place.

      2. Install the screw.

    5. Install the No. 1 back door garnish retainer with the 7 screws.

  2. INSTALL BACK DOOR GARNISH RETAINER SUB-ASSEMBLY


    1. Connect the connector.

    2. A01WTFV

      Attach the 2 clips to install the back door garnish retainer sub-assembly.

    3. Using a T30H "TORX" driver, install the 2 "TORX" screws.

  3. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here