BACK-UP LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT BACK-UP LIGHT ASSEMBLY LH


    1. B0019X9C23
      *a

      Component without harness connected

      (Back-up Light Assembly LH)

      Inspect the back-up light assembly LH.


      1. Apply battery voltage to the connector and check the illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 1

        Negative (-) → 2

        		 Back-up light illuminates
        If the result is not as specified, replace the back-up light assembly LH.

  2. INSPECT BACK-UP LIGHT ASSEMBLY RH


    1. B0019X9C23
      *a

      Component without harness connected

      (Back-up Light Assembly RH)

      Inspect the back-up light assembly RH.


      1. Apply battery voltage to the connector and check the illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 1

        Negative (-) → 2

        		 Back-up light illuminates
        If the result is not as specified, replace the back-up light assembly RH.