STOP LIGHT CONTROL RELAY(for RHD) INSTALLATION

PROCEDURE

1. INSTALL STOP LIGHT CONTROL RELAY ASSEMBLY

   
   

   1. 

      Attach the clamp to install the stop light control relay assembly.

   2. Connect the connector.

2. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

   Click here

3. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

   Click here

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

5. INSTALL INSTRUMENT PANEL BOX DOOR KNOB

   Click here

6. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

   Click here

7. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH

   Click here

8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

   Click here

9. INSTALL INSTRUMENT SIDE PANEL LH

   Click here

10. INSTALL COWL SIDE TRIM BOARD LH

    Click here

11. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

12. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

14. SRS WARNING LIGHT

    Click here

15. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here