REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT COVER LH


    1. A01WUWH

      Using moulding remover B, detach the 5 claws and remove the rear combination light cover LH.

  2. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Note

    If the rear combination light assembly LH has removed, replace the rear combination light body gasket LH with a new one.


    1. A01WTDL

      Put protective tape around the rear combination light assembly LH.

      Text in Illustration
      B0019VB Protective Tape
    2. A01WRCL

      Remove the 2 bolts.

    3. A01WSZZ

      Pull the rear combination light assembly LH toward the rear of the vehicle to detach the 2 clips and guide and remove it.

    4. Disconnect the connector.

  3. REMOVE REAR BUMPER COVER

    Click here

  4. REMOVE UPPER REAR BUMPER RETAINER LH


    1. A01WSQ3

      Using a clip remover, detach the 2 clips and remove the upper rear bumper retainer LH.

      Tech Tips

      Tape the clip remover tip before use.

      Text in Illustration
      B0019VB Protective Tape