FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FOG LIGHT ASSEMBLY LH

    A01WTZCE02
    Text in Illustration
    *a

    Component without harness connected

    (Fog Light Assembly LH)

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → B7-2 (B)

      Battery negative (-) → B7-3 (E)

      		 Fog light illuminates

      Battery positive (+) → B7-1 (B)

      Battery negative (-) → B7-3 (E)

      Battery negative (-) → B7-4 (CRPL)

      		 Cornering light illuminates

      If the result is not as specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH

    A01WP8EE02
    Text in Illustration
    *a

    Component without harness connected

    (Fog Light Assembly RH)

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → B8-2 (B)

      Battery negative (-) → B8-3 (E)

      		 Fog light illuminates

      Battery positive (+) → B8-1 (B)

      Battery negative (-) → B8-3 (E)

      Battery negative (-) → B8-4 (CRPR)

      		 Cornering light illuminates

      If the result is not as specified, replace the fog light assembly RH.