BACK-UP LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR

    Click here

  2. REMOVE BACK DOOR TRIM COVER LH

    Click here

  3. REMOVE BACK DOOR TRIM COVER RH

    Click here

  4. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  5. REMOVE BACK-UP LIGHT ASSEMBLY LH


    1. A01WPO4

      Put protective tape around the back-up light assembly LH.

      Text in Illustration
      B0019VB Protective Tape
    2. A01WVIK

      Disconnect the connector and detach the wire harness clamp.

    3. Remove the 3 screws.

    4. A01WST0

      Pull the back-up light assembly LH toward the rear of the vehicle to remove it.