BACK-UP LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 2 BACK DOOR GARNISH RETAINER (for LH Side)


    1. B0018U9

      Remove the 2 screws and No. 2 back door garnish retainer.

  3. REMOVE BACK-UP LIGHT ASSEMBLY LH


    1. B001B3W

      Disconnect the connector clamp.

    2. Remove the 3 screws and back-up light assembly LH.