REAR LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A01WTF0E01
      Text in Illustration
      *a

      Component without harness connected:

      (Rear Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → S32-5 (B)

      Battery negative (-) → S32-3 (E)

      		 Stop light illuminates

      Battery positive (+) → S32-6 (B)

      Battery negative (-) → S32-3 (E)

      		 Tail light illuminates

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A01WRTUE01
      Text in Illustration
      *a

      Component without harness connected:

      (Rear Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → S33-5 (B)

      Battery negative (-) → S33-3 (E)

      		 Stop light illuminates

      Battery positive (+) → S33-6 (B)

      Battery negative (-) → S33-3 (E)

      		 Tail light illuminates

      If the result is not as specified, replace the rear light assembly RH.