REAR LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. DISCONNECT POWER BACK DOOR ROD

    Click here

  5. REMOVE BACK DOOR SERVICE HOLE COVER RH

    Click here

  6. REMOVE BACK DOOR GARNISH

    Click here

  7. REMOVE REAR HEADER SPEAKER ASSEMBLY (for 19 Speakers)

    Click here

  8. REMOVE BACK DOOR LOWER STOPPER CUSHION

    Click here

  9. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH

    Click here

  10. REMOVE REAR LIGHT ASSEMBLY LH

    Note

    If the rear light assembly LH has removed, replace the rear light gasket LH with a new one.


    1. A01WU49

      Put protective tape around the rear light assembly LH.

      Text in Illustration
      B0019VB Protective Tape
    2. A01WS56

      Disconnect the connector.

    3. Remove the 5 nuts.

    4. A01WPQD

      Pull the rear light assembly LH toward the rear of the vehicle to detach the pin to remove it.