REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01WROBE01
      Text in Illustration
      *a

      Component without harness connected:

      (Rear Combination Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → K4-4 (TRN)

      Battery negative (-) → K4-3 (E)

      		 Turn signal light illuminates

      Battery positive (+) → K4-5 (STP)

      Battery negative (-) → K4-3 (E)

      		 Stop light illuminates

      Battery positive (+) → K4-6 (TL)

      Battery negative (-) → K4-3 (E)

      		 Tail light illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A01WULQE01
      Text in Illustration
      *a

      Component without harness connected:

      (Rear Combination Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → L3-4 (TRN)

      Battery negative (-) → L3-3 (E)

      		 Turn signal light illuminates

      Battery positive (+) → L3-5 (STP)

      Battery negative (-) → L3-3 (E)

      		 Stop light illuminates

      Battery positive (+) → L3-6 (TL)

      Battery negative (-) → L3-3 (E)

      		 Tail light illuminates

      If the result is not as specified, replace the rear combination light assembly RH.