ADAPTIVE HIGH BEAM SYSTEM INITIALIZATION

Note


  • If any of the work shown in the table below is performed, it is necessary to register the vehicle information the headlight ECU sub-assembly LH and store the steering angle sensor neutral point.

    Performed Work or System Condition Necessary Procedures Link
    Replacement of the headlight ECU sub-assembly LH Synchronize the vehicle information

    Click here

  • If the steering angle sensor steering neutral point is not stored, the adaptive high beam system and cornering lights will not operate normally.

  • A new headlight ECU sub-assembly LH cannot operate until vehicle information synchronization has been performed.

  • Even if the headlight ECU sub-assembly RH is replaced with a new one, vehicle information synchronization is not necessary.