ADAPTIVE HIGH BEAM SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE


  1. CUSTOMIZE LIGHTING SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.

        Light Control
        Tester Display Default Content Setting Relevant ECU
        AHS Function ON

        • On/off setting of adaptive high beam system

        • Operate as automatic high beam system when OFF selected

        		 ON or OFF Headlight ECU sub-assembly LH
        Residential Area Mode Setting ON Residential area mode control setting of adaptive high beam system ON or OFF Headlight ECU sub-assembly LH
        AFS (Electronic Swivel) Function ON Electronic swivel control settings of adaptive high beam system ON or OFF Headlight ECU sub-assembly LH
        Leading Vehicle Low Beam Range Ajust Function ON Setting for function which adjusts illumination range of low beams according to distance to preceding vehicle ON or OFF Headlight ECU sub-assembly LH
        AHS Operation Speed Pattern Setting Pattern 1 Operation speed setting of adaptive high beam system*1 Pattern, Pattern 3 Headlight ECU sub-assembly LH
        Left Headlight Shade Angle Setting Standard Setting of left headlight shade angle*2 Standard, Small, Large Headlight ECU sub-assembly LH
        Right Headlight Shade Angle Setting Standard Setting of right headlight shade angle*2 Standard, Small, Large Headlight ECU sub-assembly LH

        • *1: The customization function item "AHS Operation Speed Pattern Setting" can be used to customize the light distribution control of the adaptive high beam system as follows.

          Pattern 1 (Default)
          Residential Mode Normal Mode High-speed Mode
          Starting Speed Cancellation Speed Starting Speed Cancellation Speed Starting Speed Cancellation Speed
          except Europe 15 km/h (9 mph) or more 10 km/h (6 mph) less than 30 km/h (19 mph) or more 25 km/h (16 mph) less than 80 km/h (50 mph) or more 60 km/h (37 mph) less than
          for Europe (LHD) No setting No setting 60 km/h (37 mph) or more 40 km/h (25 mph) less than 120 km/h (75 mph) or more 100 km/h (62 mph) less than
          Pattern 2
          Residential Mode Normal Mode High-speed Mode
          Starting Speed Cancellation Speed Starting Speed Cancellation Speed Starting Speed Cancellation Speed
          except Europe No setting No setting 30 km/h (19 mph) or more 25 km/h (16 mph) less than 80 km/h (50 mph) or more 60 km/h (37 mph) less than
          for Europe (LHD) No setting No setting 60 km/h (37 mph) or more 40 km/h (25 mph) less than 100 km/h (62 mph) or more 80 km/h (50 mph) less than
          Pattern 3
          Residential Mode Normal Mode High-speed Mode
          Starting Speed Cancellation Speed Starting Speed Cancellation Speed Starting Speed Cancellation Speed
          except Europe No setting No setting No setting No setting 80 km/h (50 mph) or more 60 km/h (37 mph) less than
          for Europe (LHD) No setting No setting 60 km/h (37 mph) or more 40 km/h (25 mph) less than 80 km/h (50 mph) or more 80 km/h (50 mph) less than

        • *2: The customization function items "Left Headlight Shade Angle Setting" and "Right Headlight Shade Angle Setting" can be used to customize the angles as follows.

        B001A06E02
        Text in Illustration
        *a Preceding Vehicle Illuminated by High Beams of This Vehicle *b Illumination
        *c Left Headlight Shade Angle *d Right Headlight Shade Angle