LIGHTING SYSTEM OPERATION CHECK


  1. AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


    1. Turn the engine switch on (IG).

    2. Turn the light control switch to the AUTO position.

    3. Cover the automatic light control sensor.

    4. Check that the taillights and low beam headlights come on.

    5. Uncover the automatic light control sensor.

    6. Check that the low beam headlights and taillights go off.

  2. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (except Driver Door-linked Auto Light Turn-off System)


    1. When the light control switch is in the tail or head position


      1. Turn the engine switch on (IG).

      2. Turn the low beam headlights, high beam headlights, or front fog lights on.

      3. Turn the engine switch off.

      4. Check that the low beam headlights, high beam headlights and front fog lights go off immediately.

        Tech Tips

        The taillights and rear fog light remain on.

    2. When the light control switch is in the AUTO position


      1. Turn the engine switch on (IG).

      2. Turn the taillights, low beam headlights, high beam headlights, front fog lights or rear fog light on.

      3. Turn the engine switch off.

      4. Check that all of the lights go off immediately.

  3. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (for Driver Door-linked Auto Light Turn-off System)


    1. Close all of the doors.

    2. Turn the engine switch on (IG).

    3. Turn the taillights, low beam headlights, high beam headlights and front fog lights on.

    4. Turn the engine switch off.

    5. Open the driver door.

    6. Check that all of the lights go off immediately.

  4. DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK


    1. Turn the light control switch to the off* or AUTO position (with the taillights not turned on via the automatic light control system).


      • *: w/ Light Control Switch Off Position

    2. Start the engine.

    3. Release the parking brake.

    4. Check that the daytime running lights come on.

  5. WELCOME LIGHT ILLUMINATION CONTROL OPERATION CHECK


    1. Turn the light control switch to the AUTO position.

    2. Cover the automatic light control sensor.

    3. Turn the engine switch off.

    4. Close and lock all doors.

    5. Unlock all doors by wireless door unlock or entry door unlock.

    6. Check that the clearance lights come on for approximately 15 seconds.

  6. FOLLOW ME HOME SYSTEM OPERATION CHECK (w/ Follow Me Home System)


    1. Turn the engine switch off.

    2. Turn the light control switch to the AUTO position.

    3. Pull the light control switch to flash the headlights once.

    4. Check that the low beam headlights come on for approximately 30 seconds.