HEADLIGHT CLEANER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. B001890

      Connect the joint hose with the clip.

    2. B00189C

      Install the headlight cleaner motor and pump together with the gasket in the direction shown in the illustration.

      Tech Tips

      Make sure the gasket is positioned as shown in the illustration.

    3. Connect the connector.

  2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY

    Click here

  3. INSTALL WASHER INLET SUB-ASSEMBLY

    Click here

  4. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  5. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

    Click here

  6. INSTALL FRONT FENDER LINER LH

    Click here

  7. INSTALL SIDE STEP ASSEMBLY

    Click here

  8. INSTALL FRONT FENDER MUDGUARD LH

    Click here

  9. INSTALL HEIGHT CONTROL PROTECTOR PIPE

    Click here

  10. INSTALL FRONT WHEEL LH

    Torque:
    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }