HEADLIGHT CLEANER MOTOR INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

    Tech Tips

    This inspection should be performed with the headlight cleaner motor and pump installed to the washer jar.


    1. A01WSQYE02
      *1 Component without harness connected: (Headlight Cleaner Motor and Pump Assembly)

      Fill the washer jar with washer fluid.

    2. Apply battery voltage to the headlight cleaner motor and pump and check the operation of the headlight cleaner motor and pump assembly.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 2

      		 Headlight cleaner motor and pump operation is normal

      If the result is not as specified, replace the headlight cleaner motor and pump assembly.