THROTTLE BODY INSTALLATION

PROCEDURE


  1. INSTALL THROTTLE BODY ASSEMBLY


    1. Install the 2 water by-pass hoses to the throttle body.

    2. B001AZHE05
      *1 Groove
      *2 Protrusion
      *3 Surge Tank Side
      *4 Throttle Body Side

      Install a new gasket to the intake air surge tank.

      Tech Tips

      Align the protrusion of the gasket with the groove of the intake air surge tank.

    3. B0019RO

      Install the throttle body with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
    4. B0019SF

      Connect the throttle position sensor and control motor connector.

    5. Connect the 2 water by-pass hoses.

  2. INSTALL AIR CLEANER HOSE ASSEMBLY

    Click here

  3. ADD ENGINE COOLANT

    Click here

  4. INSPECT FOR COOLANT LEAK

    Click here

  5. CHECK THROTTLE BODY ASSEMBLY

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  7. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  8. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  9. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  10. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here