THROTTLE BODY REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  4. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  5. DRAIN ENGINE COOLANT

    Click here

  6. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  7. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  8. REMOVE THROTTLE BODY ASSEMBLY


    1. B0019SF

      Disconnect the 2 water by-pass hoses.

    2. Disconnect the throttle position sensor and control motor connector.

    3. B0019RO

      Remove the 4 bolts, throttle body and gasket.

    4. Remove the 2 water by-pass hoses from the throttle body.