METER / GAUGE / DISPLAY SERVICE DATA

LIGHT CONTROL RHEOSTAT
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 6 (TC) - 1 (E) TAIL cancel switch off → on 10 kΩ or higher → Below 1 Ω
5 (T) - 1 (E) Always 10 kΩ +/-20%
7 (TR) - 1 (E) Light control rheostat fully turned right → fully turned left 10 kΩ +/-20% → Below 100 Ω
TRIP SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 4 (A/B) - 1 (E) ODO TRIP switch on (Pushed) Below 1 Ω
4 (A/B) - 1 (E) ODO TRIP switch off (Not pushed) 10 kΩ or higher
HEADUP DISPLAY SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 5 (ILU) - 15 (CH) (for LHD) HUD switch on (Pushed) Below 1 Ω
HUD switch off (Not pushed) 10 kΩ or higher
4 (ILU) - 14 (CH) (for RHD) HUD switch on (Pushed) Below 1 Ω
HUD switch off (Not pushed) 10 kΩ or higher