LIGHTING (INT) SERVICE DATA

VANITY LIGHT
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected 2 (B) - 1 (E) Visor raised 10 kΩ or higher
Visor lowered and mirror cover closed 10 kΩ or higher
Visor lowered and mirror cover open Below 1 Ω
1 (B) - 2 (E) Visor raised 10 kΩ or higher
Visor lowered and mirror cover closed 10 kΩ or higher
Visor lowered and mirror cover open Below 1 Ω
ROOM LIGHT (for Front)
Connector Condition Tester Connection Switch Condition Specified Condition
Component with harness connected R7-27 (+B3) - R7-16 (GND9) Battery save system (interior light auto cut function) operating → Battery save system (interior light auto cut function) not operating 11 to 14 V → Below 1 V
R7-11 (ILLB) - R7-16 (GND9) 11 to 14 V → Below 1 V
R12-11 (GILL) - R7-16 (GND9) Light control switch tail 11 to 14 V
R12-18 (RILL) - R7-16 (GND9) No. 1 room light on → off 11 to 14 V → Below 1 V
R12-7 (RLMP) - R7-15 (RGND) Rear reading light on 11 to 14 V → Below 1 V
R12-8 (RRMP) - R7-15 (RGND) Rear reading light on 11 to 14 V → Below 1 V
R7-3 (RLSW) - R7-15 (RGND) Rear reading light on 5 V
R7-4 (RRSW) - R7-15 (RGND) Rear reading light on 5 V
R7-16 (GND9) - Body ground Always Below 1 Ω
R12-17 (GND7) - Body ground Always Below 1 Ω
R12-20 (GND5) - Body ground Always Below 1 Ω
FRONT DOOR COURTESY SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected Terminal 1 - Switch body Pin not pushed Below 1 Ω
Terminal 1 - Switch body Pin pushed 10 kΩ or higher
REAR DOOR COURTESY SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected Terminal 1 - Switch body Pin not pushed Below 1 Ω
Terminal 1 - Switch body Pin pushed 10 kΩ or higher