| Fuel injector (w/o DPF) | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 0.85 to 1.05 Ω | |||
| Fuel supply pump | Suction control valve | Standard resistance | Tester Connection | Condition | Specified Condition |
| 1 - 2 | 20°C (68°F) | 1.9 to 2.3 Ω | |||
| Standard thrust clearance | 0.05 to 0.30 mm (0.00197 to 0.0118 in.) | ||||
| Common rail | Fuel pressure sensor | Standard resistance | Tester Connection | Condition | Specified Condition |
| 1 - 2 | 25°C (77°F) | 16.4 kΩ or less | |||
| 2 - 3 | 25°C (77°F) | 3 kΩ or less | |||
| Pressure discharge valve (w/ DPF) | Standard resistance | 1 - 2 | 25°C (68°F) | 0.96 to 1.16 Ω | |
| Fuel filter | Level warning switch | Standard resistance | Tester Connection | Condition | Specified Condition |
| 1 - 2 | Float upper end position | Below 1 Ω | |||
| 1 - 2 | Float lower end position | 1 MΩ or higher | |||
| Clogging switch | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | Below 1 Ω | |||
| Fuel temperature sensor | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 2.32 to 2.59 kΩ | |||
| 1 - 2 | 80°C (176°F) | 0.310 to 0.326 kΩ | |||
| Fuel pump (for Double Tank Type) | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 0.2 to 3.0 Ω | |||
| Fuel sender gauge assembly | Standard Voltage | Tester Connection | Condition | Specified Condition | |
| 2 (FE) - 3 (FR) | Float position is F (upper) | 4.25 to 4.61 V* | |||
| Float position is E (lower) | 0.34 to 0.70 V* | ||||
| Fuel sender gauge assembly (for Fuel Sub Tank) | Standard Voltage | Tester Connection | Condition | Specified Condition | |
| 2 (FE) - 3 (FR) | Float position is F (upper) | 4.25 to 4.61 V* | |||
| Float position is E (lower) | 0.34 to 0.70 V* | ||||
*: The output voltage changes depending on the voltage applied to the terminals.