REPAIR INSTRUCTION CUSTOMIZE PARAMETERS

Tech Tips

The following items can be customized.

Note


  • When the customer requests a change in a function, first make sure that the function can be customized.

  • Be sure to make a note of the current settings before customizing.

  • When troubleshooting a function, first make sure that the function is set to the default setting.


  1. CUSTOMIZING FUNCTION WITH GTS


    1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

      Tilt & Telescopic
      Display Default Content Setting Relevant ECU
      Autoaway/Return function ON Turn the auto away/return function ON or OFF ON/OFF Multiplex tilt and telescopic ECU

    2. HEATED STEERING WHEEL SYSTEM

      Air Conditioner
      Display Default Contents Setting
      Steering Heater Sensitivity Adjust 0 Adjusts the operating time of the steering heater when the engine switch is turned on (IG). +2 / +1 / 0 / -1 / -2
      Steering Heater Auto Function ON Automatic operation of the steering heater when the engine switch is turned on (IG) can be set on or off. ON / OFF

    3. LEXUS PARKING ASSIST-SENSOR SYSTEM

      Warning
      Display Default Contents Setting Relevant ECU
      Fr Sensor Onset Range Wide Sets the buzzer activation range for the front sensors. Narrow or Wide Clearance Warning ECU Assembly
      Rr Sensor Onset Range Wide Sets the buzzer activation range for the rear sensors. Narrow or Wide Clearance Warning ECU Assembly
      Keep Sense Buzzer Avail Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail Clearance Warning ECU Assembly
      Fr & Rr Buzzer Volume H Changes the buzzer volume setting. L, M1, M2, M3 or H Clearance Warning ECU Assembly
      Temporary Mute Reset Speed Adjust 20 km/h Sets the vehicle speed at which the temporary mute function resets. System Link, 15km/h, 20km/h, 30km/h Clearance Warning ECU Assembly
      Temporary Mute Function ON Sets the availability of the temporary mute function. OFF, ON Clearance Warning ECU Assembly
      Sensor
      Display Default Contents Setting Relevant ECU
      Sensor Condition N Avail Makes the sensors available when the shift lever is in N. Not Avail or Avail Clearance Warning ECU Assembly
      Reverse Range Front Sensor F Changes the operation setting for the vehicle front sensors when the shift lever is in R. F, Fcrn or F Stop Clearance Warning ECU Assembly
      Non P/R Range Rear Sensor R Stop Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R. R, Rcrn or R Stop Clearance Warning ECU Assembly
      Display
      Display Default Contents Setting Relevant ECU
      Display Mode All The display mode setting (when the LEXUS parking assist-sensor system is normal). All or Undisp Clearance Warning ECU Assembly

    4. BLIND SPOT MONITOR SYSTEM

      Warning
      Display Default Content Setting Relevant ECU
      BSM Buzzer Volume Adjust Medium Function to adjust the buzzer volume of blind spot monitor buzzer. Low, Medium or Hight Blind Spot Monitor Sensor LH
      BSM Mirror Indicator Brightness Bright This item sets brightness level of outer rear view mirror indicator. Bright or Dark Blind Spot Monitor Sensor LH
      RCTA Function ON Switches the RCTA function on and off. ON or OFF Blind Spot Monitor Sensor LH
      BSM Approaching Vehicle Detection Timing Setting Middle Sets the notification timing for vehicles approaching from behind the vehicle. Only Blind Spot, Late, Middle or Early Blind Spot Monitor Sensor LH

    5. POWER DOOR LOCK CONTROL SYSTEM

      Door Lock
      Display Default Contents Setting
      Unlock Key Twice ON Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors. ON/OFF
      Auto Lock ON Function that locks all doors when the vehicle speed reaches a certain level. ON/OFF
      Auto Lock/Shift OFF Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed. ON/OFF
      Auto Unlock/Shift OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG). ON/OFF
      All Unlock/Open-Close

      ON*

      OFF*

      		 Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the engine switch being turned off. ON/OFF

      • *: The default setting differs depending on the vehicle.

    6. WIRELESS DOOR LOCK CONTROL SYSTEM

      Wireless Door Lock
      Display Default Contents Setting
      Hazard Answer Back*5 ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF
      Wireless Control ON Function that turns the wireless door lock function ON or OFF. ON/OFF
      Open Door Warning*1 ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds. ON/OFF
      Panic Function*2 ON Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds. ON/OFF
      Unlock 2 Operation ON Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON/OFF
      Auto Lock Time 30 s Function to change the time until relocking after unlocking with the wireless door lock function. 30 s/60 s/120 s
      Wireless Buzzer Resp*3 ON Wireless buzzer response function. ON/OFF
      P/W Wireless Ope Buzz*1 ON Wireless power window buzzer response. ON/OFF
      Wireless Buzzer Vol*4 Level 5 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

      • *1: w/ Door Ajar Warning Function

      • *2: w/ Panic Switch

      • *3: for vehicles displaying the item "Wireless Buzzer Resp" on the GTS

      • *4: w/ Wireless Door Lock Buzzer Answer-back Function

      • *5: w/ Wireless Door Lock Hazard Answer-back Function

      PSD & PBD Operation (w/ Power Back Door)
      Display Default Contents Setting
      Wireless Power Back Door Open* Lock:OFF/Unlock:0.8s Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly). Lock:OFF/Unlock:OFF, Lock:OFF/Unlock:ON, Lock:OFF/Unlock:Twice, Lock:OFF/Unlock:0.8s, Lock:Twice/Unlock:Twice or Lock:0.8s/Unlock:0.8

      • *: "Lock:Twice/Unlock:Twice" and "Lock:0.8s/Unlock:0.8s" are only available for vehicles with the wireless one motion function.

    7. ENTRY AND START SYSTEM (for Entry Function)

      Wireless Door Lock
      Display Default Content Setting Relevant ECU
      Wireless Control ON Function that turns the wireless door lock control system on or off. OFF or ON Main body ECU (Multiplex network body ECU)
      Hazard Answer Back*3 ON

      When the doors are locked by the entry lock function, the hazard warning lights flash once.

      When the doors are unlocked by the entry lock function, the hazard warning lights flash twice.

      		 OFF or ON Main body ECU (Multiplex network body ECU)
      Open Door Warning*1 ON The buzzer sounds when the lock sensor on the door outside handle assembly is touched to perform entry lock with a door open. OFF or ON Main body ECU (Multiplex network body ECU)
      Auto Lock Time 30 s Function that regulates the interval between unlocking and automatic relocking of doors. 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Resp*2 ON Wireless buzzer response. OFF or ON Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Vol*2 Level5 Buzzer answer-back volume. Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level 0 Main body ECU (Multiplex network body ECU)

      • *1: w/ Door Ajar Warning Buzzer Function

      • *2: w/ Wireless Door Lock Buzzer Answer-back Function

      • *3: for the vehicles displaying the Item "Hazard Answer Back" on the GTS

      Warning
      Display Default Content Setting Relevant ECU
      Key Low Battery Warning ON Enables or disables the sounding of the buzzer when the transmitter battery is low and the engine switch is turned off after being on (IG) for 20 minutes or more. OFF or ON Certification ECU (Smart key ECU assembly)
      Smart Key / Access
      Display Default Content Setting Relevant ECU
      Park Wait Time 2.5s Function that sets the period of time (lock confirmation time) that the door is prevented from being unlocked by operating the front door outside handle assembly after an entry lock operation is performed. 0.5s, 1.5s, 2.5s or 5s Certification ECU (Smart key ECU assembly)
      Ignition Available Area Front or All* Function that sets the area that the key must be in before the engine switch can be operated. Front or All Certification ECU (Smart key ECU assembly)
      Back Door Opening Operation Long Function that sets the back door when the user is carrying the electrical key transmitter sub-assembly and presses the back door opener switch assembly (open switch). Long, Twice or OFF Certification ECU (Smart key ECU assembly)
      Door Unlock Mode2 Driver or All* Function that sets which doors are unlocked by the entry unlock function. All or Driver Certification ECU (Smart key ECU assembly)
      Auto Entry Cancel SW OFF Function that enables or disables the entry and start system. OFF or ON Certification ECU (Smart key ECU assembly)
      Touch Activation Over Threshold Active or Not Active* The function that limits the consecutive entry lock operation to only 2 times can be changed between Active and Not Active. When in Not Active mode, there is no limit for the number of times that the consecutive entry lock operation can be performed. Active or Not Active Certification ECU (Smart key ECU assembly)
      Engine Start Indicator ON Function that turns the entry warning light on the combination meter assembly on or off. OFF or ON Certification ECU (Smart key ECU assembly)

      • *: Default setting differs depending on the country.

    8. Entry unlock mode switching function (manual operation)


      1. The following entry unlock modes can be selected when using the entry unlock mode switching function.


        • All door unlock mode: When the sensor of a front door outside handle assembly is touched, an entry unlock operation is performed simultaneously for all doors.

        • Driver door unlock mode: When the sensor of the driver side door outside handle assembly is touched, an entry unlock operation is performed for the driver door only. If any other door handle is touched, an entry unlock operation is performed simultaneously for all doors.

      2. When customizing through manual operation:


        1. Turn the engine switch off.

        2. Cancel the intrusion sensor (theft warning ultrasonic sensor).


          • *: w/ Intrusion Sensor Cancel Switch

        3. Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock switches of the electrical key transmitter sub-assembly for 5 seconds or more while the electrical key transmitter sub-assembly is in the actuation area.

        4. Check the current setting.

          Tech Tips


          • The mode changes from all door unlock mode to driver door unlock mode and then back to all door unlock mode.

          • The answer-back (wireless buzzer, buzzer in the combination meter assembly) operation for each mode is indicated in the table below.

            Currently Selected Mode Answer-back (Wireless Buzzer) Answer-back (Buzzer in Combination Meter Assembly)
            All door unlock mode Buzzer sounds twice (short beeps) Buzzer sounds once
            Driver door unlock mode Buzzer sounds 3 times (short beeps) Buzzer sounds once

        5. Release the lock and unlock switches of the electrical key transmitter sub-assembly.

        6. Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock switches of the electrical key transmitter sub-assembly for 5 seconds or more to change the mode.

          Tech Tips

          Repeat the procedure as necessary to select the desired mode.

        7. Unlock the doors with the wireless operation, and then open any door.

        B001A3UE01

    9. Entry cancel function (manual operation)

      Tech Tips

      While the entry and start system is canceled, it is possible to lock and unlock the doors with the wireless operation, and the start system can be operated by holding the electrical key transmitter sub-assembly near the engine switch.


      1. The following functions are disabled when the entry and start system is canceled.


        1. Entry unlock/lock functions

        2. Push-button start function

        3. Key lock-in prevention function

        4. Entry warning functions

      2. When canceling the entry and start system through manual operation:


        1. Make sure the following conditions are met:


          • The engine switch is off.

          • The driver door is closed.

          • The driver door is unlocked.

      3. Press the unlock switch of the electrical key transmitter sub-assembly.

      4. Open the driver door within 5 seconds of completing the step above (driver door: closed → opened).

      5. With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.

        Note

        If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.

      6. Perform the following procedure within 30 seconds of completing the step above.


        1. Close and open the driver door twice (driver door: open → closed → opened → closed → opened).

        2. With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times.

          Note

          If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.

        3. Close and open the driver door (driver door: open → closed → opened).

      7. Close the driver door within 5 seconds (driver door: open → closed).

      8. Check that the wireless buzzer sounds twice (short beeps) to confirm that the entry and start system has been canceled.

      9. Perform the following procedure to restore the entry and start system to the active state from the canceled state.


        1. Perform the procedure to cancel the entry and start system again.

        2. Check that the wireless buzzer sounds once (short beep) to confirm that the entry and start system has been restored to the active state.

          Tech Tips


          • The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.

          • The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.

    10. ENTRY AND START SYSTEM (for Start Function)

      Entry&Start
      Display Default Content Setting Relevant ECU
      Ignition Available Area All Function that sets the area that the key must be in before the engine switch can be operated. Front or All Certification ECU (smart key ECU assembly)
      Auto Entry Cancel SW ON Function that enables or disables the push-button start system. OFF or ON
      Engine Start Indicator ON Function that turns the key warning light on the combination meter assembly on or off. OFF or ON
      Warning
      Display Default Content Setting Relevant ECU
      Key Low Battery Warning ON Enables or disables the sounding of the buzzer when the transmitter battery is low and the engine switch is turned off after being on (IG) for 20 minutes or more. OFF or ON Certification ECU (smart key ECU assembly)

    11. THEFT DETERRENT SYSTEM

      Security
      Display Default Content Setting Relevant ECU
      Window Open Warning ON This function is used to enable or disable the Window open warning. OFF/ON Main Body ECU (Multiplex Network Body ECU)
      Slide Roof Open Warning*4 ON This function is used to enable or disable the sliding roof open warning. OFF/ON
      Intrusion Win Opened*1 OFF Sets the sensitivity of the intrusion sensor when the windows are opened. OFF/ON
      Security control with mechanism key*2 OFF This function makes it possible to cancel the security alarm with the mechanical key. OFF/ON
      Intrusion Sensor Sound Detection Function*1, *3 ON Set to detect an intrusion using the sound detection function. OFF/ON
      Intrusion Sensor Sensitivity Level*1, *3 Normal This function adjusts sensitivity of the sensor that detects intrusions. Low/Normal
      Security Alarm Setting*5 Normal

      Setting for theft warning siren assembly warning sounding conditions.


      • Normal: All alarm warning conditions are met.

      • Low: Short detected in theft warning siren assembly circuit.

      		 Low/Normal

      • *1: w/ Intrusion Sensor

      • *2: Vehicles displaying the Item "Security control with mechanism key" on the GTS

      • *3: w/o Door Ajar Warning Buzzer Function

      • *4: w/ Sliding Roof System

      • *5: w/ Theft Warning Siren Assembly

      Wireless Door Lock
      Display Default Content Setting Relevant ECU
      Panic Function* ON This function operates the theft deterrent system when the panic switch is pressed and held for 1.5 seconds. OFF/ON Main Body ECU (Multiplex Network Body ECU)

      • *: w/ Panic Switch

    12. LIGHTING SYSTEM (INT)

      Illuminated Entry
      Display Default Contents Setting ECU
      Lighting Time 15 sec. To change the lighting time after closing the door (it will quickly fade out in the case of turning the engine switch on (IG)). 15 sec., 7.5 sec. or 30 sec. Main body ECU (Multiplex network body ECU)
      I/L when ACC OFF ON Function to light the interior light when the engine switch is turned from on (IG) to off. ON/OFF Main body ECU (Multiplex network body ECU)
      I/L ON W/Door Key Unlock ON Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON/OFF Main body ECU (Multiplex network body ECU)
      Room Light when Aprchd ON Dome light illumination (when approaching vehicle). ON/OFF Main body ECU (Multiplex network body ECU)
      Inside Foot Light ON Interior foot light illumination. ON/OFF Main body ECU (Multiplex network body ECU)
      Center Console Spot Light ON Center console spot light. ON/OFF Main body ECU (Multiplex network body ECU)
      Mirr-Foot-Lgt Approached/Exterior Light Approached ON Function that turns on the outer rear view mirror assembly (outside footwell lights) when the vehicle is approached while carrying the key. ON/OFF Main body ECU (Multiplex network body ECU)
      Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked ON Function that turns on the outer rear view mirror assembly (outside footwell lights) when a door is unlocked with the electrical key transmitter or door lock switch of a door. ON/OFF Main body ECU (Multiplex network body ECU)
      Light Control ON This function controls the lights. ON/OFF Main body ECU (Multiplex network body ECU)
      Interior Light Control ON This function controls the interior lights. ON/OFF Main body ECU (Multiplex network body ECU)
      Scuff plate Lamp linked to Door open ON This function controls the scuff plate illumination lights. ON/OFF Main body ECU (Multiplex network body ECU)
      Interior Illumination Light ON This function controls the interior illumination (door illumination) lights. ON/OFF Main body ECU (Multiplex network body ECU)

    13. METER AND GAUGE SYSTEM

      Warning
      Display Default Contents Setting
      Driver Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer. ON/OFF
      Front Passenger Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer. ON/OFF
      ODO Display Time After IG OFF Setting 30s To change the ODO Display Time After IG OFF 30s, 60s, 600s, OFF
      Lane Change Flashing Times Setting 3 To change the lane change flashing times OFF, 3, 4, 5, 6 or 7
      Flasher Sound Volume Adjustment Medium To change the flasher sound volume Large, Medium or Small

    14. HEADUP DISPLAY SYSTEM

      Display
      Display (Item) Default Contents Setting
      Projection Adjustment (Tilt) $08: Default Setting to change the tilt of the screen $40: Clockwise (Hi), $20: Clockwise (Mid), $10: Clockwise (Lo), $08: Default, $04: Anti-Clockwise (Lo), $02: Anti-Clockwise (Mid), $01: Anti-Clockwise (Hi)
      Master Caution Display Function $01: ON Setting to turn the master warning indicator on and off $00: OFF, $01: ON
      Speed Limit Display Function $01: ON Setting to turn the speed limit information display on and off $00: OFF, $01: ON

    15. PRE-CRASH SAFETY SYSTEM

      Others
      Tester Display Description Default Setting ECU
      PCS Operation State Retention Setting operation state retention setting on/off OFF 0:OFF,1:ON Driving support ECU assembly
      PCS Alarm Activation Distance Retention Setting 1 Selects the PCS alarm activation distance retention setting 1 OFF 0:OFF,1:ON Driving support ECU assembly
      PCS Alarm Activation Distance Retention Setting 2 Selects the PCS alarm activation distance retention setting 2 ON 0:OFF,1:ON Driving support ECU assembly
      PCS Alarm Activation Distance Retention Setting 3 Selects the PCS alarm activation distance retention setting 3 OFF 0:OFF,1:ON Driving support ECU assembly

    16. FRONT POWER SEAT CONTROL SYSTEM

      Display Default Contents Setting
      Seat Travel Distance Normal Allows customizing of the seat movement distance for the power easy access system. OFF / short / Normal

    17. SEAT HEATER SYSTEM

      Seat
      Display Default Content Setting Relevant ECU
      FL Seat A/C and Heater Sensitivity Adjust 0 When in AUTO, this function automatically adjusts the temperature of the seat heater -2/-1/0/+1/+2 Air conditioning amplifier assembly
      FR Seat A/C and Heater Sensitivity Adjust 0 When in AUTO, this function automatically adjusts the temperature of the seat heater -2/-1/0/+1/+2 Air conditioning amplifier assembly
      RL Seat Heater Sensitivity Adjust* 0 When in AUTO, this function automatically adjusts the temperature of the seat heater -2/-1/0/+1/+2 Air conditioning amplifier assembly
      RR Seat Heater Sensitivity Adjust* 0 When in AUTO, this function automatically adjusts the temperature of the seat heater -2/-1/0/+1/+2 Air conditioning amplifier assembly

      • *: w/ Rear Seat Heater

    18. SEAT BELT WARNING SYSTEM

      Warning
      Display Default Contents Setting Relevant ECU
      Driver Side Seatbelt Warning Buzzer* ON If driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. ON or OFF Combination meter assembly
      Front Passenger Side Seatbelt Warning Buzzer* ON If front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. ON or OFF Combination meter assembly

      • *: w/ Seat Belt Warning Buzzer

    19. AIR CONDITIONING SYSTEM

      Air Conditioner
      Display Default Contents Setting Relevant ECU
      Set Temperature Shift Normal Function to set the temperature shift. +2 C/+1 C/Normal/-1 C/-2 C Air conditioning amplifier assembly
      Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Manual/Automatic Air conditioning amplifier assembly
      Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Manual/Automatic Air conditioning amplifier assembly
      Foot/DEF Auto Mode ON Function to turn the airflow from FOOT/DEF on automatically when auto mode is on. ON/OFF Air conditioning amplifier assembly
      Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the defroster is on. ON/OFF Air conditioning amplifier assembly
      Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature. +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C Air conditioning amplifier assembly
      Emission Gas Sensor Shift Normal Function to change the sensitivity of the exhaust gas sensor. Much Less/Less/Little Less/normal/Little More/More/Much More Air conditioning amplifier assembly
      Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow. ON/OFF Air conditioning amplifier assembly
      ECO MODE Cancel OFF Function to cancel the ECO mode drive when item is on ON/OFF Air conditioning amplifier assembly
      Refrigerant Shortage Check ON Function to cancel the refrigerant gas volume check (check performed during normal operation) when item is set to OFF ON/OFF Air conditioning amplifier assembly
      Fan speed increment control Normal Function to define how fast the air conditioning blower goes to target speed when first activating the air conditioning Slow/Normal/Fast Air conditioning amplifier assembly

    20. POWER WINDOW CONTROL SYSTEM

      Power Window
      Display Default Content Setting Relevant ECU
      Door Key P/W Up OFF This function is used to close the windows by operating the mechanical key. OFF or ON Main body ECU (Multiplex network body ECU)
      Door Key P/W Down OFF This function is used to open the windows by operating the mechanical key. OFF or ON Main body ECU (Multiplex network body ECU)
      P/W Up W/ Transmit OFF This function is used to close the windows using the electrical key transmitter subassembly. OFF or ON Main body ECU (Multiplex network body ECU)
      P/W Down W/ Transmit OFF This function is used to open the windows using the electrical key transmitter subassembly. OFF or ON Main body ECU (Multiplex network body ECU)
      D Window Auto Up ON This function is used to enable or disable the auto up function for the driver door window using the multiplex network master switch assembly. OFF or ON

      • Front power window regulator motor assembly LH (for LHD)

      • Front power window regulator motor assembly RH (for RHD)
      P Window Auto Up ON This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly. OFF or ON

      • Front power window regulator motor assembly RH (for LHD)

      • Front power window regulator motor assembly LH (for RHD)
      RR Window Auto Up ON This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH. OFF or ON Rear power window regulator motor assembly RH
      RL Window Auto Up ON This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH. OFF or ON Rear power window regulator motor assembly LH
      P Window Auto Up From Driver ON This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. OFF or ON

      • Front power window regulator motor assembly RH (for LHD)

      • Front power window regulator motor assembly LH (for RHD)
      RR Window Auto Up From Driver ON This function is used to enable or disable the remote auto up function for the rear door RH window using the multiplex network master switch assembly. OFF or ON Rear power window regulator motor assembly RH
      RL Window Auto Up From Driver ON This function is used to enable or disable the remote auto up function for the rear door LH window using the multiplex network master switch assembly. OFF or ON Rear power window regulator motor assembly LH
      D Window Auto Down ON This function is used to enable or disable the auto down function for the driver door window using the multiplex network master switch assembly. OFF or ON

      • Front power window regulator motor assembly LH (for LHD)

      • Front power window regulator motor assembly RH (for RHD)
      P Window Auto Down ON This function is used to enable or disable the auto down function for the front passenger door window using the power window regulator switch assembly. OFF or ON

      • Front power window regulator motor assembly RH (for LHD)

      • Front power window regulator motor assembly LH (for RHD)
      RR Window Auto Down ON This function is used to enable or disable the auto down function using the rear power window regulator switch assembly RH. OFF or ON Rear power window regulator motor assembly RH
      RL Window Auto Down ON This function is used to enable or disable the auto down function using the rear power window regulator switch assembly LH. OFF or ON Rear power window regulator motor assembly LH
      P Window Auto Down From Driver ON This function is used to enable or disable the remote auto down function for the front passenger door window using the multiplex network master switch assembly. OFF or ON

      • Front power window regulator motor assembly RH (for LHD)

      • Front power window regulator motor assembly LH (for RHD)
      RR Window Auto Down From Driver ON This function is used to enable or disable the remote auto up function for the rear door RH window using the multiplex network master switch assembly. OFF or ON Rear power window regulator motor assembly RH
      RL Window Auto Down From Driver ON This function is used to enable or disable the remote auto down function for the rear door LH window using the multiplex network master switch assembly. OFF or ON Rear power window regulator motor assembly LH
      Wireless Door Lock
      Display Default Content Setting Relevant ECU
      P/W Wireless Ope Buzz ON This function turns the wireless power window buzzer response on or off. OFF or ON Main body ECU (Multiplex network body ECU)
      Security
      Display Default Content Setting Relevant ECU
      Window Open Warning ON This function is used to enable or disable the window open warning. OFF or ON Main body ECU (Multiplex network body ECU)

    21. SLIDING ROOF SYSTEM

      Slide Roof
      Display Default Contents Setting
      Door Key Related Open ON The function to manually open the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off. ON/OFF
      Door Key Related Close ON The function to manually close the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to lock position when the engine switch is off. ON/OFF
      Wireless Key Related Open OFF The function to manually open the sliding roof linked with the power window if pressing the transmitter unlock switch for 3 seconds or more when the engine switch is off. ON/OFF
      Wireless Key Related Close OFF The function to manually close the sliding roof linked with the power window if pressing the transmitter lock switch for 3 seconds or more when the engine switch is off. ON/OFF
      Door Handle Lock Button ON The function to manually close the sliding roof linked with the power window if pushing the door lock switch for 3 seconds or more when the engine switch is off and the key is outside vehicle. ON/OFF
      Door Key Related Operation Slide The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off. Tilt/Slide
      Wireless Key Related Operation Slide The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by pressing on the transmitter unlock switch for 3 seconds or more when the engine switch is off. Tilt/Slide

    22. POWER BACK DOOR SYSTEM

      PSD&PBD operation
      Display Default Contents Setting
      PBD SW Operation 0.8s Function that turns power back door closer switch on when switch is pushed once or held down for 0.8 seconds. 0.8s or ON
      PBD Buzzer OFF Function that makes the power back door buzzer sound when power back door is operating ON or OFF
      PBD Assist Open Operation ON Function that enables or disables the power back door assist open operation. When PBD Assist Open Operation is set to on (enabled) the back door will open automatically when the back door opener switch (opener switch) is operated. ON or OFF
      Door Unlock with 1 Motion.*1 Back Door Function that selects the door or doors to unlock when the back door is locked and the transmitter switch (electrical key transmitter sub-assembly) is pushed to operate the power back door. Back Door or ALL DOORS
      Wireless PBD Open*2 Lock:OFF/Unlock:0.8s Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly). Lock:OFF/Unlock:OFF, Lock:OFF/Unlock:ON, Lock:OFF/Unlock:Twice, Lock:OFF/Unlock:0.8s, Lock:Twice/Unlock:Twice or Lock:0.8s/Unlock:0.8s

      Tech Tips

      *1: "ALL DOORS" is only available for vehicles with the wireless one motion function.

      *2: "Lock:Twice/Unlock:Twice" and "Lock:0.8s/Unlock:0.8s" are only available for vehicles with the wireless one motion function.

    23. POWER MIRROR CONTROL SYSTEM

      Others
      Display Default Contents Setting Relevant ECU
      Auto Fold Mirror Door Lock Function that changes the condition under which the outer mirrors automatically retract ACC / Door Lock / OFF Main body ECU (multiplex network body ECU)
      Reverse Coupled Actuation Mirror Angle User Setting Function that turns the reverse shift-linked mirror position memorization function on or off Default Setting / User Setting Main body ECU (multiplex network body ECU)

    24. LIGHTING SYSTEM

      Light Control
      Display Default Content Setting Relevant ECU
      Disp Ex ON Sen NORMAL Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 Main Body ECU (Multiplex Network Body ECU)
      Disp Ex OFF Sen NORMAL Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 Main Body ECU (Multiplex Network Body ECU)
      Sensitivity Normal Adjusts the sensitivity of the automatic light control system.*C LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 Main Body ECU (Multiplex Network Body ECU)
      DRL Function ON Turns the DRL function on/off.*2 ON/OFF Main Body ECU (Multiplex Network Body ECU)
      Follow Me Home Lighting Time* 30 s Sets the headlight lighting time after the engine switch is turned off.*1 30 s/60 s/90 s/120 s Main Body ECU (Multiplex Network Body ECU)
      Light up Clearance Lights at Door Unlock Function ON Turns on the clearance lights and the taillights for 15 seconds when the doors are unlocked by the smart key or the wireless key. ON/OFF Main Body ECU (Multiplex Network Body ECU)
      Warning
      Display Default Content Setting Relevant ECU
      Lane Change Flashing Times Setting 3 Function to change the number of flashes for the lane change flasher OFF/3/4/5/6/7 Combination meter assembly

      • *1: w/ Follow Me Home System

      • *2: Vehicles displaying the Item "DRL Function" on the GTS

      Tech Tips

      The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

      *A

      B00184ME07

      *B

      B00184ME08

      *C

      B00184ME09

    25. ADAPTIVE HIGH BEAM SYSTEM

      Light Control
      Tester Display Default Content Setting Relevant ECU
      AHS Function ON

      • On/off setting of adaptive high beam system

      • Operate as automatic high beam system when OFF selected

      		 ON or OFF Headlight ECU sub-assembly LH
      Residential Area Mode Setting ON Residential area mode control setting of adaptive high beam system ON or OFF Headlight ECU sub-assembly LH
      AFS (Electronic Swivel) Function ON Electronic swivel control settings of adaptive high beam system ON or OFF Headlight ECU sub-assembly LH
      Leading Vehicle Shade Function ON Setting for function which adjusts illumination range of low beams according to distance to preceding vehicle ON or OFF Headlight ECU sub-assembly LH
      AHS Operation Speed Pattern Setting Pattern 1 Operation speed setting of adaptive high beam system*1 Pattern, Pattern 3 Headlight ECU sub-assembly LH
      Left Headlight Shade Angle Setting Standard Setting of left headlight shade angle*2 Standard, Small, Large Headlight ECU sub-assembly LH
      Right Headlight Shade Angle Setting Standard Setting of right headlight shade angle*2 Standard, Small, Large Headlight ECU sub-assembly LH

      • *1: The customization function item "AHS Operation Speed Pattern Setting" can be used to customize the light distribution control of the adaptive high beam system as follows.

        Pattern 1 (Default)
        Residential Mode Normal Mode High-speed Mode
        Starting Speed Cancellation Speed Starting Speed Cancellation Speed Starting Speed Cancellation Speed
        except Europe 15 km/h (9 mph) or more 10 km/h (6 mph) less than 30 km/h (19 mph) or more 25 km/h (16 mph) less than 80 km/h (50 mph) or more 60 km/h (37 mph) less than
        for Europe (LHD) No setting No setting 60 km/h (37 mph) or more 40 km/h (25 mph) less than 120 km/h (75 mph) or more 100 km/h (62 mph) less than
        Pattern 2
        Residential Mode Normal Mode High-speed Mode
        Starting Speed Cancellation Speed Starting Speed Cancellation Speed Starting Speed Cancellation Speed
        except Europe No setting No setting 30 km/h (19 mph) or more 25 km/h (16 mph) less than 80 km/h (50 mph) or more 60 km/h (37 mph) less than
        for Europe (LHD) No setting No setting 60 km/h (37 mph) or more 40 km/h (25 mph) less than 100 km/h (62 mph) or more 80 km/h (50 mph) less than
        Pattern 3
        Residential Mode Normal Mode High-speed Mode
        Starting Speed Cancellation Speed Starting Speed Cancellation Speed Starting Speed Cancellation Speed
        except Europe No setting No setting No setting No setting 80 km/h (50 mph) or more 60 km/h (37 mph) less than
        for Europe (LHD) No setting No setting 60 km/h (37 mph) or more 40 km/h (25 mph) less than 80 km/h (50 mph) or more 80 km/h (50 mph) less than

      • *2: The customization function items "Left Headlight Shade Angle Setting" and "Right Headlight Shade Angle Setting" can be used to customize the angles as follows.

      B001A06E02
      Text in Illustration
      *a Preceding Vehicle Illuminated by High Beams of This Vehicle *b Illumination
      *c Left Headlight Shade Angle *d Right Headlight Shade Angle

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Turn the engine switch on (IG).

    2. Enter the following menus: Setup / Vehicle.

    3. Select the setting by referring to the table below.


    1. AUDIO AND VISUAL SYSTEM

      Display Default Content Setting Relevant ECU
      Feedback Force 0 (middle bar) Feedback force setting of the remote touch* -2, -1, 0, +1 or +2 Multi-media module receiver assembly
      NO FEEDBACK FORCE/ LEVEL1/LEVEL2/ LEVEL3/LEVEL4

      Tech Tips

      *: The higher the set value, the stronger the remote touch feedback force becomes.

    2. NAVIGATION SYSTEM

      Display Default Content Setting Relevant ECU
      Feedback Force 3 (middle bar) Feedback force setting of the remote touch* 1, 2, 3, 4 or 5 Multi-media module receiver assembly
      LEVEL1/LEVEL2/ LEVEL3/LEVEL4/LEVEL5

      Tech Tips

      *: The higher the set value, the stronger the remote touch feedback force becomes.

    3. HEATED STEERING WHEEL SYSTEM

      Display Default Contents Setting
      Auto heated steering wheel On Automatic ON setting On / Off
      Str wheel auto heating duration Center(Level3) Adjustment of the length of the OFF timer when automatic is set to ON Level1, Level2, Level3, Level4, Level5

    4. LEXUS PARKING ASSIST-SENSOR SYSTEM

      Display Default Contents Setting
      Alert volume 3 Sets the buzzer activation range for the rear center sensors. 1, 2, 3, 4 or 5
      Display Indicator of Display Off not illuminated*5 or indicator of Display Off illuminated*6 The display mode setting (when the LEXUS parking assist-sensor system is normal). On or Off
      Distance Front Green*2 Sets the detection operation range for the front center sensors. Orange*1 or Green*2
      Distance Rear Green*2 Sets the detection operation range for the rear center sensors. Orange*3 or Green*4

      • *1: Detection range of 600 mm (23.6 in.)

      • *2: Detection range of 1000 mm (39.4 in.)

      • *3: Detection range of 800 mm (31.5 in.)

      • *4: Detection range of 1500 mm (59.1 in.)

      • *5: Sonar indication is available on the multi-display

      • *6: Sonar indication is not available on the multi-display

    5. BLIND SPOT MONITOR SYSTEM

      Display Default Content Setting Relevant ECU
      Outside rear view mirror indicator brightness Dim This item sets brightness level of outer rear view mirror indicator. Dim or Bright Blind Spot Monitor Sensor LH
      Rear cross traffic alert volume 3 Function to adjust the buzzer volume of blind spot monitor buzzer. 3, 2 or 1 Blind Spot Monitor Sensor LH
      BSM Approaching Vehicle Detection Timing Setting Middle Sets the notification timing for vehicles approaching from behind the vehicle. Only Blind Spot, Late, Middle or Early Blind Spot Monitor Sensor LH

    6. POWER DOOR LOCK CONTROL SYSTEM

      Door lock settings
      Display Default Contents Setting
      Speed sensitive auto locking ON Function that locks all doors when the vehicle speed reaches a certain level. ON/OFF
      Auto lock by shift from P OFF Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed. ON/OFF
      Auto unlock by shift to P OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG). ON/OFF
      Auto unlock by driver door

      ON*

      OFF*

      		 Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the engine switch being turned off. ON/OFF

      • *: The default setting differs depending on the vehicle.

    7. WIRELESS DOOR LOCK CONTROL SYSTEM

      Display Default Contents Setting
      Remote 2-press unlock ON Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON/OFF
      Lock/unlock feedback-lights*1 ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF
      Lock/Unlock feedback-Tone*2 Level 5 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

      • *1: w/ Wireless Door Lock Hazard Answer-back Function

      • *2: w/ Wireless Door Lock Buzzer Answer-back Function

    8. ENTRY AND START SYSTEM (for Entry Function)

      Display Default Content Setting Relevant ECU
      Select Doors to Unlock Driver's door or All doors*1 Function that sets which doors are unlocked by the entry unlock function. All Doors or Driver's Door Certification ECU (Smart key ECU assembly)
      Entry and start system On Function that enables or disables the entry and start system. On or Off Certification ECU (Smart key ECU assembly)
      Lock/Unlock Feedback-Lights*3 On When the doors are locked by the entry lock function, the hazard warning lights flash once. When the doors are unlocked by the entry lock function, the hazard warning lights flash twice. On or Off Main body ECU (Multiplex network body ECU)
      Lock/Unlock Feedback-Tone*2 5 Buzzer answer-back volume. Off, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)

      • *1: Default setting differs depending on the country.

      • *2: w/ Wireless Door Lock Buzzer Answer-back Function

      • *3: for the vehicles displaying the Item "Hazard Answer Back" on the GTS

    9. LIGHTING SYSTEM (INT)

      Display Default Contents Setting Relevant ECU
      Interior Lights Off Time 15 sec. This function controls the interior lights. Off, 15 sec., 7.5 sec. or 30 sec. Main body ECU (Multiplex network body ECU)

    10. FRONT POWER SEAT CONTROL SYSTEM

      Display Default Contents Setting
      Driver's seat easy exit Partial Allows customization of the seat movement distance for the power easy access system. Full / Partial / Off

    11. SEAT HEATER SYSTEM

      Climate Settings
      Display Default Contents Setting Relevant ECU
      FR L Seat temp. auto crtl. mode 0 When in AUTO, this function automatically adjusts the temperature of the seat heater -2/-1/0/+1/+2 Air conditioning amplifier assembly
      FR R Seat temp. auto crtl. mode 0 When in AUTO, this function automatically adjusts the temperature of the seat heater -2/-1/0/+1/+2 Air conditioning amplifier assembly
      RR L Seat temp. auto crtl. mode* 0 When in AUTO, this function automatically adjusts the temperature of the seat heater -2/-1/0/+1/+2 Air conditioning amplifier assembly
      RR R Seat temp. auto crtl. mode* 0 When in AUTO, this function automatically adjusts the temperature of the seat heater -2/-1/0/+1/+2 Air conditioning amplifier assembly

      • *: w/ Rear Seat Heater

    12. AIR CONDITIONING SYSTEM

      Air Conditioner
      Display Default Contents Setting Relevant ECU
      Auto A/C Mode On Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch. On or Off Air conditioning amplifier assembly
      Efficient Ventilation Mode On Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on. On or Off Air conditioning amplifier assembly
      Smog Sensor Sensitivity 0 Changes the sensitivity of the exhaust gas sensor. -2, -1, 0, +1, +2 Air conditioning amplifier assembly

    13. LIGHTING SYSTEM (EXT)

      Lights settings
      Display Default Content Setting Relevant ECU
      Light sensor sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
      Daytime running lights* On Turns the DRL function on/off. On or Off Main Body ECU (Multiplex Network Body ECU)
      Exterior lights off timer 15 sec. Changes the lighting time of the outside handle foot lights. OFF, 7.5 sec., 15 sec. or 30 sec. Main Body ECU (Multiplex Network Body ECU)

      • *: Vehicles displaying the Item "Daytime running lights" on the multi-information display.

      Tech Tips

      The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

      *A

      B00184ME10
      *a Sensitivity of the automatic light control system
      *b Dark
      *c Bright
      *d Setting

  3. CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY


    1. Turn the engine switch on (IG).

    2. Enter the following menus: Setup / Vehicle.

    3. Select the setting by referring to the table below.


    1. LANE DEPARTURE ALERT SYSTEM

      Display Default Content Setting Relevant ECU
      Warning Method Buzzer Method of lane departure warning Buzzer/steering vibrator Forward recognition camera
      Sensitivity Normal Change LDA Sensitivity Normal/High Forward recognition camera
      Sway Warning On Lane Sway Warning Status On/Off Forward recognition camera
      Sway Sensitivity Normal Sway Warning Sensitivity Low/Normal/High Forward recognition camera

    2. ROAD SIGN ASSIST SYSTEM

      Settings Tab
      Display Default Content Setting Relevant ECU
      RSA ON/OFF ON System ON/OFF setting ON or OFF forward recognition camera
      Road Sign Assist Setup
      Display Default Content Setting Relevant ECU
      Excess Speed Only Visual Speed limit exceeded notification method setting No Notification, Only Visual or Visual and Audible forward recognition camera
      Notification Level 2 km/h (1 mph) Speed limit exceeded notification level setting* 10 km/h (5 mph), 5 km/h (3 mph), 2 km/h (1 mph) forward recognition camera
      Other Notifications Only Visual No overtaking notification method setting No Notification, Only Visual or Visual and Audible forward recognition camera

      *: When the speed unit settings of the meter are changed, the displayed unit also changes.

    3. METER / GAUGE SYSTEM

      Settings
      Combination Meter Assembly Display Description Default Setting
      Reset Scheduled Maint. Data Function to reset the scheduled maintenance Data - Yes, No
      Reset Oil Maint. Data Function to reset the oil maintenance Data - Yes, No
      Change Language Function to change the language on the display English(BRITISH) English, Germany, French, Spanish, Italian, Russian, or Chinese
      Change Display Units Function to change the units on the display miles (MPG)*1 or km (L/100 km)*2 km (km/L), km (L/100 km), miles (MPG)
      Eco Indicator On/Off Function to turn on/off the ECO indicator On On, Off
      Switch Settings Function to change the screen assigned to the TOP button on the steering pad switch assembly Drive Info 1 -
      Change Interrupt Settings Function to change the interrupt display setting a displayed item ON On, Off
      Choose Button Color Function to change the cursor color when selecting a displayed item White Heat White Heat or Titanium Silver
      Drive Info 1 Function to change the item to be displayed on Drive Info 1 Current Fuel Economy (Bar Type), Average Fuel Economy (After Reset) Current Fuel Economy (Bar Type, Value Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Start), Distance (Range, After Start), Other (Blank)
      Drive Info 2 Function to change the item to be displayed on Drive Info 2 Distance (Range), Average Speed (After Reset) Current Fuel Economy (Bar Type, Value Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Start), Distance (Range, After Start), Other (Blank)
      Do You Want to Return to Factory Settings? Reset Settings to Defaults - -

      • *1: for miles unit

      • *2: for km unit