KNOCK SENSOR INSTALLATION

PROCEDURE

1. INSTALL KNOCK SENSOR

   

   
   

   1. Install the 4 sensors with the 4 bolts so that the sensors are angled as shown in the illustration.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      The acceptable installation angle of the sensor is between 10° upward and downward from the horizontal position.

   2. Connect the 4 sensor connectors.

2. INSTALL NO. 1 ENGINE COVER

   Click here

3. INSTALL NO. 2 ENGINE COVER

   Click here

4. INSTALL INTAKE MANIFOLD

   
   

   1. Install the intake manifold Click here.