CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL VVT SENSOR


    1. B0019M4E02
      *1 for Bank 2:
      *2 for Bank 1:

      Install the 4 sensors with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Connect the 4 sensor connectors.

  2. INSTALL CAMSHAFT POSITION SENSOR

    B00186F

    1. Install the sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Connect the sensor connector.

  3. INSTALL AIR CLEANER HOSE ASSEMBLY

    Click here

  4. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  5. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here