ACCELERATOR PEDAL INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL ASSEMBLY

   Note

   
   

   • This accelerator pedal does not require lubrication.

     Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

     If applied, the accelerator pedal sensor assembly must be replaced.

   • Avoid physical shocks to the accelerator pedal.

   • Do not disassemble the accelerator pedal.

   
   

   1. Install the accelerator pedal with the 2 nuts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the accelerator pedal position sensor connector.

2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here