ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH


    1. A000SMRE02
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the center roof drip side finish moulding.

    2. Using a moulding remover, detach the 2 clips and remove the center roof drip side finish moulding.

      Note


      • When removing the center roof drip side finish moulding, be careful not to damage the No. 1 roof drip side finish moulding clips.

      • If a No. 1 roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.