FRONT SEAT CUSHION HEATER(for Standard Seat Type) INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER (for Driver Side)


    1. Measure the resistance according to the value(s) in the table below.

      A000QPQE01
      Text in Illustration
      *1 Connector A *2 Connector B
      *3 Connector C - -
      *a

      Component without harness connected

      (Separate Type Front Seat Cushion Cover (Front Seat Cushion Heater))

      		 - -
      Standard resistance
      Separate Type Front Seat Cushion Cover
      Tester Connection Condition Specified Condition
      C1 - C2 17 to 23°C 3.4 to 4.2 Ω
      C2 - C3
      B1 - B7 Always 7.2 to 8.8 kΩ
      A1 - B5 Always Below 1 Ω
      A1 - C1
      A3 - C3
      A4 - B3
      A5 - B6
      B5 - C1

      If the result is not as specified, replace the separate type front seat cushion cover.

  2. INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER (for Front Passenger Side)


    1. Measure the resistance according to the value(s) in the table below.

      A000QPQE01
      Text in Illustration
      *1 Connector A *2 Connector B
      *3 Connector C - -
      *a

      Component without harness connected

      (Separate Type Front Seat Cushion Cover (Front Seat Cushion Heater))

      		 - -
      Standard resistance
      Separate Type Front Seat Cushion Cover
      Tester Connection Condition Specified Condition
      C1 - C2 17 to 23°C 3.4 to 4.2 Ω
      C2 - C3
      B1 - B7 Always 7.2 to 8.8 kΩ
      A1 - B5 Always Below 1 Ω
      A1 - C1
      A3 - C3
      A4 - B3
      A5 - B6
      B5 - C1

      If the result is not as specified, replace the separate type front seat cushion cover.