REAR SEATBACK HEATER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL BENCH TYPE REAR SEATBACK COVER

   
   

   1. Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with new hog rings.

      Note

      
      

      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      

      Text in Illustration

      *1

      Hog Ring Pliers

      -

      -

   2. 

      Pass the brackets of the bench type rear seatback cover through the holes in the bench type rear seatback pad.

      Note

      
      

      • After the bench type rear seatback cover is installed, make sure the bench type rear seatback cover bracket is not twisted.

   3. Install the rear seat airbag assembly LH Click here.

   4. Install the rear seat airbag assembly RH.

      Tech Tips

      Use the same procedure described for the LH side.

   5. 

      Pass the rear seatback heater wire harnesses through the holes in the bench type rear seatback cover.

   6. Pass the bench type rear seatback pad through the holes in the bench type rear seatback cover.

   7. Pass the bench type rear seatback cover through the holes in the bench type rear seatback pad.

   8. Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with new hog rings.

      Note

      
      

      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      

      Text in Illustration

      *1

      Hog Ring Pliers

      -

      -

   9. 

      Attach the clamp of the rear seat wire RH.

   10. Pass the rear seat wire RH under the rubber bands of the bench type rear seatback cover.

   11. Connect the 2 rear seatback heater connectors.

2. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY

   Click here

3. INSTALL REAR SEAT HEADREST SUPPORT

   Click here

4. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE

   Click here

5. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

   Click here

6. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

   Click here

7. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

   Click here

8. INSTALL REAR SEAT ASSEMBLY

   Click here