FRONT SEATBACK HEATER(for Standard Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. A000O06E01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A000QIE

      Pass the 2 seatback cover brackets through the 2 holes of the separate type front seatback pad.

  2. INSTALL SEATBACK COVER WITH PAD

    Click here

  3. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  4. INSTALL FRONT SEAT ASSEMBLY

    Click here

  5. CHECK SRS WARNING LIGHT

    Click here

  6. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  7. INSPECT SEAT HEATER SYSTEM

    Click here

  8. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

    Click here

  9. INSPECT POWER SEAT CONTROL SYSTEM

    for LHD: Click here

    for RHD: Click here

  10. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.