FRONT SEATBACK HEATER(for Standard Seat Type) INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE FRONT SEATBACK COVER (for Driver Side)


    1. A000NSBE06
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seatback Cover (Front Seatback Heater))

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Separate Type Front Seatback Cover
      Tester Connection Condition Specified Condition
      1 - 3 17 to 23°C 6.3 to 7.7 Ω
      2 - 3
      1 - 2 Always Below 1 Ω

      If the result is not as specified, replace the separate type front seatback cover.

  2. INSPECT SEPARATE TYPE FRONT SEATBACK COVER (for Front Passenger Side)


    1. A000NSBE06
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seatback Cover (Front Seatback Heater))

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Separate Type Front Seatback Cover
      Tester Connection Condition Specified Condition
      1 - 3 17 to 23°C 6.3 to 7.7 Ω
      2 - 3
      1 - 2 Always Below 1 Ω

      If the result is not as specified, replace the separate type front seatback cover.