CLIMATE CONTROL SEAT SWITCH INSPECTION

PROCEDURE


  1. INSPECT REFRESHING SEAT SWITCH (w/o Seat Heater System)


    1. Apply auxiliary battery voltage to the switch connector and check that the refreshing seat switch illuminates.

      A000OXXE01
      Text in Illustration
      *a

      Component without harness connected

      (Refreshing Seat Switch)

      - -
      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → 6 (ILL+)

      Auxiliary battery negative (-) → 8 (ILL-)

      Illumination illuminates

      If the result is not as specified, replace the refreshing seat switch.

  2. INSPECT REFRESHING SEAT SWITCH (w/ Seat Heater System)


    1. Apply auxiliary battery voltage to the switch connector and check that the refreshing seat switch illuminates.

      A000T1KE01
      Text in Illustration
      *a

      Component without harness connected

      (Refreshing Seat Switch)

      - -
      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → 6 (ILL+)

      Auxiliary battery negative (-) → 8 (ILL-)

      Illumination illuminates

      If the result is not as specified, replace the refreshing seat switch.