LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Standard Seat Type) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  3. REMOVE SEATBACK COVER WITH PAD


    1. A000T4E

      w/ Seat Heater System:

      Disconnect the connector.

    2. A000NMF

      Detach the hooks.

    3. A000RWJ

      Detach the 4 claws and remove the 2 front seat headrest supports.

    4. A000P2RE01
      Text in Illustration
      *1 Seatback Cover Bracket

      Detach the wire harness clamp.

    5. Remove the 2 nuts and detach the seatback cover bracket.

    6. Remove the seatback cover with pad.

  4. REMOVE SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)

    Click here

  5. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

    A000R03

    1. Disconnect the connector.

    2. Remove the 2 springs and detach the 2 clips.

    3. A000SAD

      Remove the 2 bolts.

    4. Slide the lumbar support adjuster assembly LH upward to detach the 2 hooks and remove it.