LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Luxury Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    1. Slide the lumbar support adjuster assembly LH downward to attach the 2 hooks and install it.

    2. Install the 2 bolts.

    3. Attach the 2 clips and install the 2 springs.

    4. Attach the 2 cable clamps.

    5. Connect the 2 connectors.

  2. INSTALL SEATBACK CLIMATE CONTROL BLOWER LH

    Click here

  3. INSTALL SEATBACK COVER WITH PAD


    1. Install the seatback cover with pad.

    2. A000NRHE01
      Text in Illustration
      *1 Seatback Cover Bracket

      Attach the seatback cover bracket with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      CAUTION:

      After the seatback cover bracket is attached, make sure the seatback cover bracket is not twisted.

    3. Attach the wire harness clamp.

    4. Attach the 4 claws to install the 2 front seat headrest supports.

    5. Attach the wire harness clamp.

    6. Attach the hooks

    7. Connect the connector.

  4. INSTALL FRONT POWER SEAT SWITCH ASSEMBLY RH (w/ Shoulder Switch)

    Click here

  5. INSTALL FRONT SEATBACK BOARD

    Click here

  6. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  7. INSTALL FRONT SEAT ASSEMBLY

    Click here

  8. CHECK SRS WARNING LIGHT

    Click here

  9. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  10. PERFORM INITIALIZATION

    Note

    Under any of the following conditions, perform initialization of the position control ECU assembly.

    for LHD: Click here

    for RHD: Click here


    • The position control ECU assembly is replaced.

    • The power seat motor assembly is inspected or replaced.

    • The front seat adjuster is inspected or replaced.

    • The lumbar support adjuster assembly is inspected or replaced.

    • The front seatback adjuster assembly is inspected or replaced.

    • The front seatback support is inspected or replaced.

  11. INSPECT POWER SEAT CONTROL SYSTEM

    for LHD: Click here

    for RHD: Click here

  12. INSPECT SEAT HEATER SYSTEM

    Click here

  13. INSPECT CLIMATE CONTROL SEAT SYSTEM

    Click here

  14. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.