LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Luxury Seat Type) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  3. REMOVE FRONT SEATBACK BOARD

    Click here

  4. REMOVE FRONT POWER SEAT SWITCH ASSEMBLY RH (w/ Shoulder Switch)

    Click here

  5. REMOVE SEATBACK COVER WITH PAD


    1. A000RCX

      Disconnect the connector.

    2. A000MXS

      Detach the hooks.

    3. A000O42

      Detach the wire harness clamp.

    4. A000QHZ

      Detach the 4 claws and remove the 2 front seat headrest supports.

    5. A000NRHE01

      Detach the wire harness clamp.

    6. Remove the 2 nuts and detach the seatback cover bracket.

      Text in Illustration
      *1 Seatback Cover Bracket

    7. Remove the seatback cover with pad.

  6. REMOVE SEATBACK CLIMATE CONTROL BLOWER LH

    Click here

  7. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    1. A000SPN

      Disconnect the 2 connectors.

    2. Detach the 2 cable clamps.

    3. A000P2Q

      Remove the 2 springs and detach the 2 clips.

    4. A000SAD

      Remove the 2 bolts.

    5. Slide the lumbar support adjuster assembly LH upward to detach the 2 hooks and remove it.