LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Sports Seat Type) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  3. REMOVE SEATBACK COVER WITH PAD (for Driver Side)

    A000RCX

    1. Disconnect the connector.

    2. A000P5J

      Detach the hooks.

    3. A000O42

      Detach the wire harness clamp.

    4. A000Q4Q

      Detach the 4 claws and remove the 2 front seat headrest supports.

    5. A000QVAE03

      Detach the wire harness clamp.

    6. Remove the 2 nuts and detach the seatback cover bracket.

      Text in Illustration
      *1 Seatback Cover Bracket

    7. Remove the seatback cover with pad.

  4. REMOVE SEATBACK COVER WITH PAD (for Front Passenger Side)

    A000T4E

    1. Disconnect the connector.

    2. A000P15

      Detach the hooks.

    3. A000RWJ

      Detach the 4 claws and remove the 2 front seat headrest supports.

    4. A000PWJE03

      Detach the wire harness clamp.

    5. Remove the 2 nuts and detach the 2 seatback cover brackets.

      Text in Illustration
      *1 Seatback Cover Bracket

    6. Remove the seatback cover with pad.

  5. REMOVE SEATBACK CLIMATE CONTROL BLOWER LH

    Click here

  6. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side)


    1. A000SPN

      Disconnect the 2 connectors.

    2. Detach the 2 cable clamps.

    3. A000MUI

      Remove the 2 springs and detach the 2 clips.

    4. A000SAD

      Remove the 2 bolts.

    5. Slide the lumbar support adjuster assembly LH upward to detach the 2 hooks and remove it.

  7. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (for Front Passenger Side)


    1. A000QFW

      Disconnect the connector.

    2. Remove the 2 springs and detach the 2 clips.

    3. A000PFU

      Remove the 2 bolts.

    4. Slide the lumbar support adjuster assembly RH upward to detach the 2 hooks and remove it.